view cart (0 Items)

Get news and special offers

MR07

Adapter Mount

MR07 Adapter Mount -- provides Picatinny rail

Hover on image to zoom

$120.00
Quantity:
Fit and Finish
Product Design
Product Performance
Durability
Reliability
SF Customer Service
Overall Value
See all ratings Close ratings

MR07

A rocksolid rail for a badass weapon system. Only downside, finish came with some imperfections though and the surefire x300 ultra WL doesn't lock completely in place. Its so tight the weaponlight doesn't fall off. All and all, it's a great product!!!

Reviewed by Blake G. (Posted on 3/25/15)

Fit and Finish
Product Design
Product Performance
Durability
Reliability
SF Customer Service
Overall Value
See all ratings Close ratings

MR07

Excellent product. Fits snugly on my Springfield 1911 Mil-Spec as if it came from the factory. I mounted a Streamlight TLR1 and it didn't budge even after shooting all day at an NRA course. The MR07 + Streamlight combo is rock solid. The slide stop that comes with the MR07 functions perfectly, it's beefy and locks back the slide on empty magazines reliably.

Reviewed by KenL (Posted on 3/3/15)

Fit and Finish
Product Design
Product Performance
Durability
Reliability
SF Customer Service
Overall Value
See all ratings Close ratings

Great Product ~ quality and function

Firm connection and solid machined part! I was surprised to have to swap out my slide lock but am happy with the machined part that came with the MR07.
Fitted snug and perfect with out the shim on my gold cup 911 Colt
Light interconnected securely and feels right at home under there.

It's too long to fit on ultra compact 1911s but then you might not want the light/laser weight in your holster anyhow on a compact. Just wanted to note it here since on a 1911 compact the front of the MR07 will stick out a bit giving a bayonet type of look....

Great product, the finish and quality will pair nicely with your firearm,

Reviewed by jem (Posted on 2/27/15)

MR07 - Highly Recommended!

Great product. Highly recommend it. Installed on my Sig 1911 Nightmare Carry. Fit was superb. Suggestion: make a slide stop pin in stainless finish for folks who are replacing pins in the same finish. Would preserve orinigal look of "two tone" pistols. Keep up the good work.

Reviewed by vmf (Posted on 4/13/14)

MR07

Great piece of working gear. Mounted on my Kimber CDP II. Along with Crimson Trace grips and a Surefire G2 LED and clickie cap mounted on a rotating mount, my gun is now user friendly. I have a laser/light on my Kimber TLE/RL II but the lack of rail on the CDP II bothered me. Not anymore! I am old and like my guns in pairs...allows use of same mags and ammo...cuts down on confusion factor. I like my Surefire lights because of longer burn time and I can use them both as standalone or mounted weapon light. Suggestion: make a rotating mount for flashlights and watch people flock to buy them. Thanks for all the good gear you do make!

Reviewed by Randy J. Malorin, SFC, USA (Ret) (Posted on 12/21/13)

MR07

Excellent product. Makes me love my Kimber Procarry even more.

Reviewed by DW Atlante (Posted on 10/12/13)

  • 1

Description

MR07
The MR07 attaches to any standard rail-less 1911-type pistol with GI-type trigger guard, providing the rail necessary to mount any SureFire X Series WeaponLight. With the MR07 attached, the X Series WeaponLights can be easily slid off your pistol, carried separately, and slid on again when needed. The MR07 also allows mounting SureFire P107, P117C, P117D, W117C, and W117D WeaponLights.

The MR07 fits snugly and securely to the pistol. This lightweight, low-profile mount is slim enough to allow the pistol plus mount to fit softened GI-type holsters. May not fit custom-molded holsters. Made from very high strength 7000 series aluminum; many competition mounts are made from 6000 series, which has about half the strength. Attaches via modified slide stop and pin assembly machined from pre-hardened chrome-molybdenum steel. Pin fit is match-grade. Trigger guard locking wedge is energy absorbent polyurethane, avoiding metal-to-metal contact, and can be tightened with a cartridge rim - no hex wrench necessary. A spacer shim is provided to accommodate manufacturing variations in the trigger guard thickness (e.g. the Colt Gold Cup). Features an anti-chafing pad to prevent scoring of the dust cover.
Features
  • Secure semi-permanent mount
  • Slim design allows holstering pistol-plus-mount in many softer holsters
  • Anti-chafing pad prevents dust cover damage
  • Construction: Ultra high-strength 7000-series aluminum

Related Information

Warning: Non-Removable Illumination Tool Heads

Shipping Rates 30-Day Money-Back Satisfaction Guarantee Report Counterfeits

SureFire is Designed and Built in the USA