- KX4 LED Conversion Head
Bought this light to replace the P61 bulbs I had been using in my light. The new light is brighter, consumes less battery life than the old incandescent, which is important to me given the cost of the batteries. Not a cheap fix to improve P61 performance parameters but a good long term investment if you plan to keep your light like I do.
Reviewed by Mark K (Posted on 10/21/13)
- Great Update to my Flashlight
Works very well. Improved battery life and brighter light too.
Reviewed by Borgrd (Posted on 10/14/13)
- Simple but Expensive Upgrade
The KX4 LED conversion head conversion was simple and straightforward and resulted in a flashlight that is considerably brighter with a noticeably reduced consumption of batteries. The quality and craftsmanship are first-rate but at $85.00, I had every right to expect it. I would have purchased and installed the conversion kit a long time ago but it took me several months to convince myself that it was worth it to spend $85.00 to upgrade to my existing flashlight versus buying a competitors complete new flashlight for a lesser price.
Reviewed by GMO-Houston, TX (Posted on 10/13/13)
If you need extra light to see into small recesses or in daylight this is the light for you. Normal lights wash out in sunlight, not this one. Ever try to check battery fluid in your car in daylight. It is very difficult. With this light it is a snap. I use it when working on small mechanical devices. I can pick out part numbers and detect hidden problems. I almost didn't buy it because of the cost but after using it in my shop; I wouldn't be without it.
Reviewed by Ralph M (Posted on 10/12/13)
I was hoping for a brighter beam ,, but otherwise it's ok
Reviewed by robert carroll (Posted on 10/12/13)
This conversion head does exactly what I wanted it to do, increase the light out put of my surefire 6P light. It is attached to my home defense shotgun.
Reviewed by Bill Mc (Posted on 10/12/13)
- Elevator tech.
I am disappoint in the LED light. My light with the original bulb was bright and reliable , after buying the LED it would not always work. I had to play with it, and take it apart and bend and clean the contacts. I still have the light, but I bought a new (different brand) light that I carry everyday for work.
Reviewed by D. Doyle (Posted on 10/12/13)
- KX4 LED Conversion Head
This is the first piece of Surefire gear that I have ever replaced, and all I was doing was upgrading. This part has turned my outstanding light into a monster light. The brightness of these L.E.D.s is insane. The beam that it puts out is perfect, no-one could hide from this light. If you take your equipment, weapon, job, and life seriously then this KX4 LED conversion head is a must have in your kit. I would never hesitate recommending this part, I actually already have to the guys on my Team. And when you add the Red and the Blue bezels, you have a light system like no other because no other light systems compare.
Reviewed by CSM. Stewart W Davis (Posted on 10/12/13)
The KX4 LED conversion does not work very well with my old 6P flashlight. No matter what I do, or how much I tighten it on the body of my flashlight, the new conversion light flickers. I must tap the flashlight to get it to stop flickering, and then it only lasts for a while and then continues to flicker. I would not recommend spending $85 on this conversion.
Reviewed by Dave Church (Posted on 10/12/13)
- Excellent fit
Provided the perfect conversion for my 6P.
Reviewed by William Somers (Posted on 10/11/13)
|Max Output -- White Light||120||.0||lumens|
The KX4 LED conversion head changes the maximum output of two-and three-battery SureFire flashlights to 120 lumens, and serves as an LED conversion/upgrade for SureFire incandescent flashlights equipped with P60 or P61 incandescent lamps. Features an aerospace aluminum bezel in a variety of colors and finishes; a precision micro-textured reflector that creates a smooth, flawless beam; and a high-efficiency LED emitter with no filament to burn out or break. Simply remove the bezel and P60 or P61 emitter currently installed on the flashlight and screw on the KX4 LED head to convert.
Any finish and/or color KX4 LED head can be used on any SureFire flashlight equipped with a P60 or P61 emitter. However, for the best match pair flashlight and KX4 version as follows:
- C2L Hard Anodized order KX4 in Hard Anodized
- G2L, G2L-FYL, G3L, G3L-FYL and G2ZL in Black order KX4 in Black Hard Anodized
- 6PL & Z2L in Black order KX4 in Black Anodized
- G2L, G3L & G2ZL in Tan or OD Green order KX4 in Tan or OD Green
- G2 in Yellow order KX4 in Yellow
- Max Output: 120 lumens; Tactical Runtime: 2-3.3 hours, depending on flashlight model
- Virtually indestructible LED regulated to maximize output and runtime
- Precision micro-textured reflector creates smooth, optimized beam
- High-strength aluminum construction; weatherproof O-ring and gasket sealing
- Powder coated, Type II anodized, or Mil-Spec Type III hard-anodized finish for extreme durability
- Weatherproof O-ring and gasket sealing
- Backed by SureFire's No-Hassle Guarantee