- Flexible weapon light
Excellent weaponlight if you need both IR and white light for close to medium range. Don't leave the bezel selected to white light for storage or your batteries will slowly drain.
Reviewed by TIm (Posted on 7/12/14)
|Output / Runtime -- White Light|
|High||150||.0||lumens / 1.8 hours**|
|Med||75||.0||lumens / N/A|
|Low||15||.0||lumens (nav mode) / N/A|
|Output / Runtime -- Infrared (IR)|
|High||240||mW / 8.0 hours|
|Med||100||mW / N/A|
|Low||6||.0||mW / N/A|
lights) until output drops below 50 lumens.
The variable-output M720V RAID WeaponLight produces brilliant 150-lumen white light or 240 milliwatts of infrared output for use with night vision deviceswith no need for IR filters or spare lamps. Simply push and twist the self-locking selector ring on the dual-spectrum V-series head to switch between white light or IR illuminationor select the "disable" setting to prevent accidental discharges. In either spectrum mode, the M720V's TIR lens produces a tight beam suited for close- to medium-range applications with sufficient peripheral illumination for situational awareness. The highly efficient LEDs are virtually immune to failure since there's no filament to burn out or break.
The M720V comes with a pressure-activated SR07-M720V tape switch (with a 7" cable) that can be positioned where you choose. If your remote switch becomes damaged or disconnected, rotate your RAID WeaponLight's white-light selector switch to ";flashlight" mode and activate it directly via its integral pushbutton dome switch. (This same pushbutton switch provides low navigational white light when "flashlight" mode is not selected.) This selector switch also lets you choose three different white-light output settings: high, medium, or strobe. The IR selector switch, located on opposite side, offers high-, medium-, and low-output settings when IR mode is selected on head.
The M720V attaches solidly to your Picatinny rail via our Swing-Lever™ clamp, which self-adjusts to out-of-spec rails and features a lever lock to prevent loosening from recoil or impact. Built to withstand the rigors of combat, the M720V is constructed of high-strength aerospace aluminum with Mil-Spec hard anodizing for superior toughness and corrosion resistance and optically coated tempered glass for durability and maximum light transmission. It's also O-ring and gasket sealed to keep out dust, dirt, and moisture. Available in Black or Desert Tan.
[NSN, Black body color: 6230-01-590-2412]
[NSN, Desert Tan body color: 6230-01-592-9028]
Fits: Rifles, carbines, or submachine guns with a Picatinny rail on the forend. (See our Picatinny Rail Forends).
- Virtually indestructible white and IR LEDs regulated to maximize light output and runtime
- SwitchesMomentary/constant-on SR07-M720V tape switch (7" cable), momentary/constant-on pushbutton dome switch
- Mounting systemIntegral Swing-Lever™ clamp for Picatinny rails
- ConstructionHigh-strength aerospace aluminum with Mil-Spec anodizing; coated, tempered window
- WeatherproofO-ring and gasket sealed
- Includes high-energy 123A batteries with 10-year shelf life
- Available in Black (BK) or Desert Tan (TN)
Exposure to strobing lights may cause dizziness, disorientation, and nausea. A very small percentage of people suffer from photosensitive epilepsy-approximately .00025% of the population-and may experience seizures or blackouts triggered by strobing lights. Visit www.epilepsyfoundation.org for more information about this rare form of epilepsy. Anyone who has had symptoms linked to this condition should consult a doctor before using this product.